Bush Hog TD-1100 Operator's Manual

© 2014 Alamo Group Inc.TD1100Published 10/14 Part No. 50024754OPERATOR’S MANUAL BUSH HOG®2501 Griffin Ave.Selma, AL 36703334-874-2700www.bushhog.comTR

SAFETYTD1100 10/14 Safety Section 1-2© 2014 Alamo Group Inc.SAFETYGENERAL SAFETY INSTRUCTIONS AND PRACTICESA careful operator is the best operator.

MAINTENANCETD1100 10/14 Maintenance Section 5-12© 2014 Alamo Group Inc.MAINTENANCEPROPER TORQUE FOR FASTENERSThe chart lists the correct tightening t

SAFETYTD1100 10/14 Sección de Seguridad 1-25© 2014 Alamo Group Inc.SAFETY

SAFETYTD1100 10/14 Sección de Seguridad 1-24© 2014 Alamo Group Inc.SAFETY

SAFETYTD1100 10/14 Sección de Seguridad 1-23© 2014 Alamo Group Inc.SAFETY

SAFETYTD1100 10/14 Sección de Seguridad 1-22© 2014 Alamo Group Inc.SAFETY

SAFETYTD1100 10/14 Sección de Seguridad 1-21© 2014 Alamo Group Inc.SAFETY

SAFETYTD1100 10/14 Sección de Seguridad 1-20© 2014 Alamo Group Inc.SAFETY

SAFETYTD1100 10/14 Sección de Seguridad 1-19© 2014 Alamo Group Inc.SAFETY

SAFETYTD1100 10/14 Sección de Seguridad 1-18© 2014 Alamo Group Inc.SAFETY

SAFETYTD1100 10/14 Safety Section 1-3© 2014 Alamo Group Inc.SAFETYOPERATOR SAFETYTO AVOID SERIOUS INJURY OR DEATH DO THE FOLLOWING:• READ, UNDERSTAN

SAFETYTD1100 10/14 Sección de Seguridad 1-17© 2014 Alamo Group Inc.SAFETY

SAFETYTD1100 10/14 Sección de Seguridad 1-16© 2014 Alamo Group Inc.SAFETY

SAFETYTD1100 10/14 Sección de Seguridad 1-15© 2014 Alamo Group Inc.SAFETYDescripción de Calcomanía

SAFETYTD1100 10/14 Sección de Seguridad 1-14© 2014 Alamo Group Inc.SAFETYINFORMACIÓN DE PARTESNOTA: Si necessita un manual completamente en español

SAFETYTD1100 10/14 Sección de Seguridad 1-13© 2014 Alamo Group Inc.SAFETYRIESGOS CON EL MANTENIMIENTO DEL IMPLEMENTOMANTENGA LOS IMPLEMENTOS EN BUEN

SAFETYTD1100 10/14 Sección de Seguridad 1-12© 2014 Alamo Group Inc.SAFETYRIESGOS EN TRANSPORTEPARA EVITAR LESIONES GRAVES O LA MUERTE AL REMOLCAR O

SAFETYTD1100 10/14 Sección de Seguridad 1-11© 2014 Alamo Group Inc.SAFETYRIESGOS ELÉCTRICOS Y DE FUEGOPARA EVITAR LESIONES GRAVES O LA MUERTE POR C

SAFETYTD1100 10/14 Sección de Seguridad 1-10© 2014 Alamo Group Inc.SAFETYRIESGO DEL CONTACTO A LAS CUCHILLAS DE CORTADORA RIESGO DE FILTRACION DE AC

SAFETYTD1100 10/14 Sección de Seguridad 1-9© 2014 Alamo Group Inc.SAFETYRIESGO DE ENREDO POR EL PTO MANTÉNGASE ALEJADO DE LAS LÍNEAS DE CONDUCCIÓN Y

SAFETYTD1100 10/14 Sección de Seguridad 1-8© 2014 Alamo Group Inc.SAFETYRIESGO DE ATROPELLOPARA EVITAR LESIONES GRAVES O LA MUERTE POR CAÍDA DEL TRA

SAFETYTD1100 10/14 Safety Section 1-4© 2014 Alamo Group Inc.SAFETYCONNECTION OR DISCONNECTING IMPLEMENT SAFETYTO AVOID SERIOUS INJURY OR DEATH FROM

SAFETYTD1100 10/14 Sección de Seguridad 1-7© 2014 Alamo Group Inc.SAFETYRIESGO DE OBJECTOS LANZADOS ContinuadoOPERACIÓN DE LA CORTADORA:• NO exceda

SAFETYTD1100 10/14 Sección de Seguridad 1-6© 2014 Alamo Group Inc.SAFETYRIESGO DE OBJECTOS LANZADOSLAS CORTADORAS GIRATORIAS PUEDEN ARROJAR OBJETOS

SAFETYTD1100 10/14 Sección de Seguridad 1-5© 2014 Alamo Group Inc.SAFETYRIESGO DE APLASTAMIENTOPARA EVITAR UNA LESIÓN GRAVE O LA MUERTE POR CAÍDA DE

SAFETYTD1100 10/14 Sección de Seguridad 1-4© 2014 Alamo Group Inc.SAFETYSEGURIDAD DE CONECTAR O DESCONECTAR IMPLEMENTOPARA EVITAR LESIONES GRAVES O

SAFETYTD1100 10/14 Sección de Seguridad 1-3© 2014 Alamo Group Inc.SAFETYSEGURIDAD DEL OPERADORPARA EVITAR LESIONES GRAVES O LA MUERTE, SIGA LAS SIGU

SAFETYTD1100 10/14 Sección de Seguridad 1-2© 2014 Alamo Group Inc.SAFETYINSTRUCCIONES DE SEGURIDAD Y PRÁCTICAS GENERALESEl mejor operador es un oper

Sección de Seguridad 1-1© 2014 Alamo Group Inc.SECCIÓN DE SEGURIDAD

Instrucciones de operaciones antes de la entrega del DISTRIBUIDOR al CLIENTEEl distribuidor deberá informar al comprador de este producto las condicio

Bush Hog está dispuesto a suministrar un (1) Video de Prácticas de Seguridad para Cortadoras AEMPor favor enviar: Video de Seguridad para el Operador

SAFETYTD1100 10/14 Safety Section 1-5© 2014 Alamo Group Inc.SAFETYCRUSHING HAZARDSTO AVOID SERIOUS INJURY OR DEATH FROM FALLING OFF TRACTOR, EQUIPME

A fin de reducir la tasa de accidentes y mejorar la operación segura de las cortadoras, Alamo Group Ag Division seha asociado con otros fabricantes de

Al propietario/operador/distribuidorEste Manual del Operador es una parte esencial de la operación segura de esta máquina y se debe mantener conla uni

© 2014 Alamo Group Inc.TD1100Published 10/14 Part No. 50024754MANUAL DE OPERADOR BUSH HOG®2501 Griffin Ave.Selma, AL 36703334-874-2700www.bushhog.comC

SAFETYTD1100 10/14 Safety Section 1-6© 2014 Alamo Group Inc.SAFETYTHROWN OBJECTS HAZARDSROTARY MOWERS CAN THROW OBJECTS 300 FEET OR MORE UNDER ADVER

SAFETYTD1100 10/14 Safety Section 1-7© 2014 Alamo Group Inc.SAFETYTHROWN OBJECTS HAZARDS (CONTINUED)MOWER OPERATION:• DO NOT exceed mower's rat

SAFETYTD1100 10/14 Safety Section 1-8© 2014 Alamo Group Inc.SAFETYRUN OVER HAZARDSTO AVOID SERIOUS INJURY OR DEATH FROM FALLING OFF TRACTOR OREQUIPM

SAFETYTD1100 10/14 Safety Section 1-9© 2014 Alamo Group Inc.SAFETYPTO ENTANGLEMENT HAZARDSKEEP AWAY FROM ROTATING DRIVELINES AND ELEMENTS TO AVOID S

SAFETYTD1100 10/14 Safety Section 1-10© 2014 Alamo Group Inc.SAFETYMOWER BLADE CONTACT HAZARDSKEEP AWAY FROM ROTATING BLADES TO AVOID SERIOUS INJURY

SAFETYTD1100 10/14 Safety Section 1-11© 2014 Alamo Group Inc.SAFETYHIGH PRESSURE OIL LEAK HAZARDSTO AVOID SERIOUS INJURY OR DEATH FROM HIGH PRESSURE

SAFETYTD1100 10/14 Safety Section 1-12© 2014 Alamo Group Inc.SAFETYELECTRICAL & FIRE HAZARDSTO AVOID SERIOUS INJURY OR DEATH FROM ELECTRICAL CON

SAFETYTD1100 10/14 Safety Section 1-13© 2014 Alamo Group Inc.SAFETYTRANSPORTING HAZARDSTO AVOID SERIOUS INJURY AND DEATH WHEN TOWING OR TRANSPORTING

SAFETYTD1100 10/14 Safety Section 1-14© 2014 Alamo Group Inc.SAFETYHAZARDS WITH MAINTENANCE OF IMPLEMENTAVOID SERIOUS INJURY OR DEATH FROM COMPONENT

SAFETYTD1100 10/14 Safety Section 1-15© 2014 Alamo Group Inc.SAFETYPARTS INFORMATIONPARTS INFORMATIONBush Hog mowers use balanced and matched system

SAFETYTD1100 10/14 Safety Section 1-16© 2014 Alamo Group Inc.SAFETYDecal LocationNOTE: Bush Hog supplies safety decals on this product to promote s

SAFETYTD1100 10/14 Safety Section 1-17© 2014 Alamo Group Inc.SAFETYITEM PART NO. QTY. TYPE DESCRIPTION1. 50058089 2 LOGO Bush Hog Name2. D754 1 WARN

SAFETYTD1100 10/14 Safety Section 1-18© 2014 Alamo Group Inc.SAFETYDecal Description

SAFETYTD1100 10/14 Safety Section 1-19© 2014 Alamo Group Inc.SAFETY

SAFETYTD1100 10/14 Safety Section 1-20© 2014 Alamo Group Inc.SAFETY

SAFETYTD1100 10/14 Safety Section 1-21© 2014 Alamo Group Inc.SAFETY

In order to reduce accidents and enhance the safe operation of mowers, Bush Hog, in cooperation with otherindustry manufacturers has developed the AEM

SAFETYTD1100 10/14 Safety Section 1-22© 2014 Alamo Group Inc.SAFETY

SAFETYTD1100 10/14 Safety Section 1-23© 2014 Alamo Group Inc.SAFETY

SAFETYTD1100 10/14 Safety Section 1-24© 2014 Alamo Group Inc.SAFETY

SAFETYTD1100 10/14 Safety Section 1-25© 2014 Alamo Group Inc.SAFETY

SAFETYTD1100 10/14 Safety Section 1-26© 2014 Alamo Group Inc.SAFETY

SAFETYTD1100 10/14 Safety Section 1-27© 2014 Alamo Group Inc.SAFETYFederal Laws and RegulationsThis section is intended to explain in broad terms th

Introduction Section 2-1© 2014 Alamo Group Inc.INTRODUCTION SECTION

INTRODUCTIONTD1100 10/14 Introduction Section 2-2© 2014 Alamo Group Inc.INTRODUCTIONWe are pleased to have you as a Bush Hog customer. Your Rotary Cu

INTRODUCTIONTX1100 10/14 Introduction Section 2-3© 2014 Alamo Group Inc.INTRODUCTIONThe Bush Hog Model TD1100 is designed for turf maintenance applic

Bush Hog will provideone (1) AEM Mower Safety Practices VideoPlease Send Me: VHS Format – AEM/FEMA Mower Operator Safety Video DVD Format – AEM/FEMA M

INTRODUCTIONTD1100 10/14 Introduction Section 2-4© 2014 Alamo Group Inc.INTRODUCTIONAttention Owner/OperatorBEFORE OPERATING THIS MACHINE:1. Carefull

INTRODUCTIONTX1100 10/14 Introduction Section 2-5© 2014 Alamo Group Inc.INTRODUCTIONLIMITED WARRANTYBush Hog warrants

Assembly Section 3-1© 2014 Alamo Group Inc.ASSEMBLY SECTION

ASSEMBLYTD1100 10/14 Assembly Section 3-2© 2014 Alamo Group Inc.ASSEMBLYOperating with PTO speed over 540 RPM can cause excessive vibration with subs

Operation Section 4-1© 2014 Alamo Group Inc.OPERATION SECTION

OPERATIONTD1100 10/14 Operation Section 4-2© 2014 Alamo Group Inc.OPERATIONBush Hog TD1100 TRI-DECK FINISHING MOWERROTARY MOWER OPERATION INSTRUCTIO

OPERATIONTD1100 10/14 Operation Section 4-3© 2014 Alamo Group Inc.OPERATION1. OPERATOR REQUIREMENTSSafe operation of the unit is the responsibility

OPERATIONTD1100 10/14 Operation Section 4-4© 2014 Alamo Group Inc.OPERATION2. TRACTOR REQUIREMENTSThe tractor used to operate the mower must have th

OPERATIONTD1100 10/14 Operation Section 4-5© 2014 Alamo Group Inc.OPERATION2.4 DrawbarThe tractor drawbar must be positioned at a certainlength base

To the Owner/Operator/DealerThis Operator's Manual is an integral part of the safe operation of this machine and must be maintained with theimple

OPERATIONTD1100 10/14 Operation Section 4-6© 2014 Alamo Group Inc.OPERATIONDO NOT use a PTO adapter to attach a non-matching Implement driveline to

OPERATIONTD1100 10/14 Operation Section 4-7© 2014 Alamo Group Inc.OPERATIONNever allow children or other persons to ride on the Tractor or Implement

OPERATIONTD1100 10/14 Operation Section 4-8© 2014 Alamo Group Inc.OPERATION4. STARTING THE TRACTORThe operator must have a complete understanding of

OPERATIONTD1100 10/14 Operation Section 4-9© 2014 Alamo Group Inc.OPERATION5.1 Connecting the Mower Tongue to the Tractor1. The tractor must be equi

OPERATIONTD1100 10/14 Operation Section 4-10© 2014 Alamo Group Inc.OPERATION5.3 Connecting Mower Hydraulics1. With the tractor shut down and secured

OPERATIONTD1100 10/14 Operation Section 4-11© 2014 Alamo Group Inc.OPERATION6.1 Cutting Height Adjustment1. Using the tractor hydraulics, raise the

OPERATIONTD1100 10/14 Operation Section 4-12© 2014 Alamo Group Inc.OPERATION7.1 Driveline Length CheckWhen fitting the mower to the tractor, the tel

OPERATIONTD1100 10/14 Operation Section 4-13© 2014 Alamo Group Inc.OPERATION“Bottoming Out” Check Procedure• Disconnect driveline from the tractor a

OPERATIONTD1100 10/14 Operation Section 4-14© 2014 Alamo Group Inc.OPERATION7.2 Constant Velocity (CV) DrivelineFor mowers equipped with a Constant

OPERATIONTD1100 10/14 Operation Section 4-15© 2014 Alamo Group Inc.OPERATIONDo not turn so sharp or lift mower so high to produce a severe "kno

DEALER to CUSTOMER Pre-Delivery/ Operation InstructionsDealer should inform the Purchaser of this product of Warranty terms, provisions, and procedure

OPERATIONTD1100 10/14 Operation Section 4-16© 2014 Alamo Group Inc.OPERATION8.1 Tractor Pre-Operation Inspection/ServiceRefer to the tractor operato

OPERATIONTD1100 10/14 Operation Section 4-17© 2014 Alamo Group Inc.OPERATION• Check that the main driveline securelyattached to the tractor and the

OPERATIONTD1100 10/14 Operation Section 4-18© 2014 Alamo Group Inc.OPERATION• Inspect oil level in all gearboxes andreplenish if needed. A low oil l

OPERATIONTD1100 10/14 Operation Section 4-19© 2014 Alamo Group Inc.OPERATION• Inspect mower tire condition, wheel bearings,and lug nut torque.• Chec

OPERATIONTD1100 10/14 Operation Section 4-20© 2014 Alamo Group Inc.OPERATIONFinishing Mower PRE-OPERATION InspectionMower ID#_______________________

OPERATIONTD1100 10/14 Operation Section 4-21© 2014 Alamo Group Inc.OPERATIONTractor PRE-OPERATION InspectionTractor ID#:________________________Make

OPERATIONTD1100 10/14 Operation Section 4-22© 2014 Alamo Group Inc.OPERATION9. DRIVING THE TRACTOR AND IMPLEMENTSafe tractor transport requires the

OPERATIONTD1100 10/14 Operation Section 4-23© 2014 Alamo Group Inc.OPERATION9.1 Starting the TractorThe procedure to start the tractor is model spec

OPERATIONTD1100 10/14 Operation Section 4-24© 2014 Alamo Group Inc.OPERATION1. Raise wings and center section to full height.2. Make certain that lo

OPERATIONTD1100 10/14 Operation Section 4-25© 2014 Alamo Group Inc.OPERATION9.5 Driving the Tractor and MowerStart off by operating at a slow speed

TABLE OF CONTENTSSAFETY SECTION ... 1-1GENE

OPERATIONTD1100 10/14 Operation Section 4-26© 2014 Alamo Group Inc.OPERATION9.6 Crossing Ditches and Steep InclinesWhen crossing ditches with steep

OPERATIONTD1100 10/14 Operation Section 4-27© 2014 Alamo Group Inc.OPERATIONInclines and ditches should be approached along aline which is at an ang

OPERATIONTD1100 10/14 Operation Section 4-28© 2014 Alamo Group Inc.OPERATIONMany varied objects, such as wire, cable, rope, or chains, can become en

OPERATIONTD1100 10/14 Operation Section 4-29© 2014 Alamo Group Inc.OPERATION10.2 Bystander/Passerby PrecautionsIf a bystander comes within 100 yards

OPERATIONTD1100 10/14 Operation Section 4-30© 2014 Alamo Group Inc.OPERATION10.5 Operating the MowerOnly operate the mower from the tractor operator

OPERATIONTD1100 10/14 Operation Section 4-31© 2014 Alamo Group Inc.OPERATIONDo not mow with two machines in the same area except with Cab tractors w

OPERATIONTD1100 10/14 Operation Section 4-32© 2014 Alamo Group Inc.OPERATIONLarge, dense, or wet vegetation may need to bemowed in two or more passe

OPERATIONTD1100 10/14 Operation Section 4-33© 2014 Alamo Group Inc.OPERATION10.6 Shutting Down the ImplementTo shut down attached mower head, first

OPERATIONTD1100 10/14 Operation Section 4-34© 2014 Alamo Group Inc.OPERATION11. DISCONNECTING THE MOWER FROM THE TRACTORBefore disconnecting the mow

OPERATIONTD1100 10/14 Operation Section 4-35© 2014 Alamo Group Inc.OPERATION12. MOWER STORAGEIt is recommended that the mower be stored with the cen

Brake and Differential Lock Setting ...

OPERATIONTD1100 10/14 Operation Section 4-36© 2014 Alamo Group Inc.OPERATION13. TRANSPORTING THE TRACTOR AND IMPLEMENTInherent hazards of operating

OPERATIONTD1100 10/14 Operation Section 4-37© 2014 Alamo Group Inc.OPERATIONTo raise mower for transport, drive the unit to alevel area, pull the ch

OPERATIONTD1100 10/14 Operation Section 4-38© 2014 Alamo Group Inc.OPERATIONIf the tractor’s hydraulic pump is not independent of the tractor PTO, o

OPERATIONTD1100 10/14 Operation Section 4-39© 2014 Alamo Group Inc.OPERATIONThe SMV (Slow-Moving Vehicle) emblem isuniversal symbol used to alert dr

OPERATIONTD1100 10/14 Operation Section 4-40© 2014 Alamo Group Inc.OPERATIONReduce speed before turning or applying the brakes.Ensure that both brak

OPERATIONTD1100 10/14 Operation Section 4-41© 2014 Alamo Group Inc.OPERATIONArrange the chains so that when tightened, thechains are pulling downwar

OPERATIONTD1100 10/14 Operation Section 4-42© 2014 Alamo Group Inc.OPERATION14. TROUBLESHOOTING GUIDEPROBLEM POSSIBLE CAUSE POSSIBLE REMEDYStreaking

OPERATIONTD1100 10/14 Operation Section 4-43© 2014 Alamo Group Inc.OPERATIONPROBLEM POSSIBLE CAUSE POSSIBLE REMEDYBelt Slipping Belt loose Tighten o

Maintenance Section 5-1© 2014 Alamo Group Inc.MAINTENANCE SECTION

Safety Section 1-1© 2014 Alamo Group Inc.SAFETY SECTION

MAINTENANCETD1100 10/14 Maintenance Section 5-2© 2014 Alamo Group Inc.MAINTENANCEPARTS INFORMATIONBefore operating your Cutter, make sure it is prope

MAINTENANCETD1100 10/14 Maintenance Section 5-3© 2014 Alamo Group Inc.MAINTENANCE

MAINTENANCETD1100 10/14 Maintenance Section 5-4© 2014 Alamo Group Inc.MAINTENANCEGEARBOXThe Gearbox has been filled with lubricant to the Test Plug L

MAINTENANCETD1100 10/14 Maintenance Section 5-5© 2014 Alamo Group Inc.MAINTENANCECENTER 4-WAY GEAR BOXGearbox is filled from factory with proper lube

MAINTENANCETD1100 10/14 Maintenance Section 5-6© 2014 Alamo Group Inc.MAINTENANCEGAUGE WHEEL ASSEMBLIESGauge wheels are equipped with bushings which

MAINTENANCETD1100 10/14 Maintenance Section 5-7© 2014 Alamo Group Inc.MAINTENANCEDRIVELINE LUBRICATIONThe Drivelines and U-Joints should be inspected

MAINTENANCETD1100 10/14 Maintenance Section 5-8© 2014 Alamo Group Inc.MAINTENANCECV DRIVELINE PROFILE LUBRICATIONGrease telescoping profile tube thro

MAINTENANCETD1100 10/14 Maintenance Section 5-9© 2014 Alamo Group Inc.MAINTENANCEBLADE SERVICINGInspect blades before each use to determine that they

MAINTENANCETD1100 10/14 Maintenance Section 5-10© 2014 Alamo Group Inc.MAINTENANCEBLADE INSTALLATIONInstall washer on blade bolt, insert bolt into bl

MAINTENANCETD1100 10/14 Maintenance Section 5-11© 2014 Alamo Group Inc.MAINTENANCESPINDLE BELT REPLACEMENT1. Flip up black latches and remove right a